Gerbing Gyde 3-Finger Camouflage Heated Gloves – 7V Battery

Gerbing Gyde�s heated gloves are paired with our patented Microwire heat technology and made from lightweight, stretchable materials that help to improve dexterity and comfort during a wide range of activities. Finished with a water-resistant membrane, they repel water and keep your hands dry in adverse conditions. Small reinforcement layers are added to the fingertips for extra grip and added abrasion resistance. The index finger is equipped with a conductive material for ease of use with your smartphone or tablet without the hassle of removing your gloves.

Gerbing Gyde Heated Gloves Include:

• � 2pc – 7V 3400 mAH Rechargeable Lithium-ion Battery Pack (25.16Wh)
• � 1pc – Dual Battery Wall Charger
• � Detailed Instructions
• � Gerbing Lifetime Warranty

Gerbing Heated Gloves Features:

• � 135 F Maximum Heating Temperature
• � Full-finger heating to the tips
• � Premium outer shell with Cyberian Cordloc system
• � TPU molded cinch strap
• � Chamois Thumb
• � Three level silicone switch for easy temperature controll
• � AQUATEX� breathable water resistant membrane
• � Primaloft insulation with 270 grams on top of hand and 170

Battery has 4 heat-settings as indicated by lights and Heat Times:

• � 100% (4 red/blue lights) – 2 Hours
• � 75% (3 red/blue lights) – 3 Hours
• � 50% (2 red/blue lights) – 5 Hours
• � 25% (1 red/blue lights) – 8 Hours

Charging Battery:

• � We recommend charging overnight for first charge.
• � Charge 100% before use (a full charge takes about 3 hours).
• � A red light will appear on wall charger when charging.
• � The red light will change to green when charged.
• � Maintain at least 25% power when battery is not in use. This practice will prolong the life of any 7V battery.

Each heated glove features an on-board temperature control button that regulates the temperature with three optimum heat levels. The 7.4V lithium battery is secured in a pocket on the top side of the gauntlet for increased freedom of motion during almost any outdoor activity.

Instructions for Silicone Switches:

• � Step 1: Plug in fully charged battery.
• � Step 2: Switch will cycle through settings, this indicates switch has power and can now be used.
• � Step 3: To power on, push and hold down button for 2-3 seconds until the switch illuminates.
• � Step 4: To change power setting, tap button to cycle through levels.
• Low = Green
• Medium = Yellow
• High = Red
• � Step 5: To power off, push and hold down button until light goes out.